12 x 2-in Phillips, Flat Head, Fine Thread, Tek 3 Winged Drill Point Screws (Bulk)
Item Number: 12200FW3
Attaches 1-in or thicker plywood to 20-8 gauge metal.
Superfast #3 drill point, 24 threads-per-inch, flat head provides a flush finished surface, winged point creates pilot hole through the plywood.
Attaches 1-in or thicker plywood to 20-8 gauge metal.
Superfast #3 drill point, 24 threads-per-inch, flat head provides a flush finished surface, winged point creates pilot hole through the plywood.
Specifications
Application:Metal to Metal, Plywood to Metal
Bit Tip:Phillips Bit Tip
Coating:Clear Zinc
Gauge:12
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The flat head design provides better holding power in sheathing to heavy gauge metal applications.
- Grabber heavy gauge sheathing screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing. Special wings clear away sheathing material as the screw drives eliminating jacking.
- Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 2,500.
- The flat head is fully seated when the head is flush with the work surface.
- Overdriving my result in fastener failure or strip out of the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- Attach sheathing to steel 33 mil or thicker.
- Wings
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. Specific fasteners are listed in ICC ESR-1271; please check the report for listed item numbers. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, DRIVALL®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
Attaches 1-in or thicker plywood to 20-8 gauge metal.
Superfast #3 drill point, 24 threads-per-inch, flat head provides a flush finished surface, winged point creates pilot hole through the plywood.
Specifications
Application:Metal to Metal, Plywood to MetalBit Tip:Phillips Bit TipCoating:Clear ZincGauge:12Head Type:Flat HeadLength:2-inMetric Size:50.8Package Type:BoxPoint Type:Tek 3 Winged Drill PointThread Type:Fine Thread