Attaches sheathing, insulation board, wood, etc. to metal studs 20-12 ga. Standard bugle head. Superior GrabberGard exterior grade coating provides additional corrosion protection.
GrabberGard exterior grade coating
GrabberGard® metal finish is a high-grade proprietary metal surface processing technology that prevents corrosion. It is a duplex coating constituting a zinc substrate and organic polymer topcoat. The distinguishing feature of GrabberGard® is the joining and encapsulation the substrate with the fused organic surface coating. These layers are bonded together through thermal fusion, and this unique method of combining layers results in a combination of the coating films. GrabberGard® treatment does not attribute its anti-corrosion properties to any single material, but the synergy of these two layers, which when combined has superb corrosion resistant qualities.
Specifications
Application:Drywall To Heavy-Gauge Metal, Sheathing to Metal
Bit Tip:Phillips Bit Tip
Coating:GrabberGard® Gray
Gauge:8
Head Type:Bugle Head
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- Head dies are changed more frequently, screws are more evenly heat treated resulting in better formed and stronger heads that resist popping off as screws seat.
- GrabberGard® limited lifetime exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and 2500 RPM
- The Bugle head is fully seated when the head is flush with the work surface.
- Overdriving may result in failure of the fastener or strip out of the
- work surface.
- Minimum 2500 rpm 4 amp screwgun recommended.
- Install screws flush with surface, or with a countersink.
- Sheathing attachment to steel 33 mil or thicker. Superior corrosion resistance.
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. Specific fasteners are listed in ICC ESR-1271; please check the report for listed item numbers. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, DRIVALL®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
Attaches sheathing, insulation board, wood, etc. to metal studs 20-12 ga. Standard bugle head. Superior GrabberGard exterior grade coating provides additional corrosion protection.
GrabberGard exterior grade coating
GrabberGard® metal finish is a high-grade proprietary metal surface processing technology that prevents corrosion. It is a duplex coating constituting a zinc substrate and organic polymer topcoat. The distinguishing feature of GrabberGard® is the joining and encapsulation the substrate with the fused organic surface coating. These layers are bonded together through thermal fusion, and this unique method of combining layers results in a combination of the coating films. GrabberGard® treatment does not attribute its anti-corrosion properties to any single material, but the synergy of these two layers, which when combined has superb corrosion resistant qualities.Specifications
Application:Drywall To Heavy-Gauge Metal, Sheathing to MetalBit Tip:Phillips Bit TipCoating:GrabberGard® GrayGauge:8Head Type:Bugle HeadLength:2-3/8-inPackage Type:BoxPoint Type:Drill PointThread Type:Fine Thread