Grabber®
10 x 1-7/16-in #2 Phillips Thin Wafer Head Screws (1-LB)
Item Number: X101716W3
Attaches 3/16-in to 3/4-in plywood to 20-8 gauge metal. Wafer head provides a greater bearing surface than Pan or Hex Drillers, with a low-profile head exposure.
Superfast #3 drill point, 24 threads-per-inch, thin wafer head provides a flush finished surface, winged point creates pilot hole through the plywood.
Specifications
Application:Plywood to Metal
Bit Tip:#2 Phillips
Coating:Clear Zinc
Gauge:10
Head Type:Thin Wafer Head
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified.
Attaches 3/16-in to 3/4-in plywood to 20-8 gauge metal. Wafer head provides a greater bearing surface than Pan or Hex Drillers, with a low-profile head exposure.
Superfast #3 drill point, 24 threads-per-inch, thin wafer head provides a flush finished surface, winged point creates pilot hole through the plywood.
Specifications
Application:Plywood to MetalBit Tip:#2 PhillipsCoating:Clear ZincGauge:10Head Type:Thin Wafer HeadLength:1-7/16-inPackage Type:1 LB