Grabber
Grabber®
10 x 3/4-in Phillips, Modified Truss Head, Fine Thread, Drill Point Screws (Bulk)
Item Number: 234Z10CW
10 x 3/4-in Phillips, Modified Truss Head, Fine Thread, Drill Point Screws (Bulk)

Designed for heavy (20-8) gauge steel applications where low profile head exposure is desired. Wafer head provides a greater bearing surface than pan or hex drillers, with a low-profile head exposure.

Hydrogen Embrittlement:
Grabber’s 10-, 12- and 14-gauge zinc-plated drill point fasteners are plated as prescribed in the ASTM F1941-10 Standard Specification for Electrodeposited Coatings on Threaded Fasteners, and post-plating baked according to the process articulated in SAE AMS 2759/9, Hydrogen Embrittlement Relief (Baking) of Steel Parts, Section 3.3.3.1, and SAE J78, which calls for a four-hour minimum time for baking out entrapped hydrogen after acid treating the parts.

Grabber’s 10-, 12- and 14-gauge drill point fasteners are also tested for hydrogen embrittlement by benchmarks outlined in ASME B18.6.4, section 2.9.1.4, Hydrogen Embrittlement Test, and the SAE J78 4.4.1 Hydrogen Embrittlement Test Criteria, under protocols articulated in ASME B18.18.2 Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners.

Specifications

Application:Metal to Metal

Bit Tip:Phillips Bit Tip

Coating:Clear Zinc

Gauge:10

Head Type:Modified Truss Head