Grabber®
12 x 1-1/2-in Hex Head, Fine Thread, Tek 3 Drill Point Screws (Bulk)
Item Number: 12150H3RG
Hex head framing screw used in heavy gauge (20-8) metal to metal applications where high torque is required Superior GrabberGard® exterior grade coating provides additional corrosion protection.
Specifications
Application:Metal to Metal
Bit Tip:Nut Driver
Coating:GrabberGard® Gray
Gauge:12
Head Type:Hex Head
- Hex washer head design provide maximum torque and holding power in metal to metal framing applications.
- The hex washer head design provides a larger load bearing surface for better holding power.
- GrabberGard® limited lifetime exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
- Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 2,500.
- The hex head is fully seated when the head is flush with the work surface.
- Overdriving my result in fastener failure or strip out of the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- Steel-to-steel connections. High torque applications. Superior corrosion resistance.
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. Specific fasteners are listed in ICC ESR-1271; please check the report for listed item numbers. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, DRIVALL®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
Hex head framing screw used in heavy gauge (20-8) metal to metal applications where high torque is required Superior GrabberGard® exterior grade coating provides additional corrosion protection.
Specifications
Application:Metal to MetalBit Tip:Nut DriverCoating:GrabberGard® GrayGauge:12Head Type:Hex HeadLength:1-1/2-inPackage Type:BulkPoint Type:Tek 3 Drill PointThread Type:Fine Thread