7 x 7/16-in Phillips, Pan Head, Fine Thread Screws (1-LB)
Item Number: X23
Attaches light-gauge metal to metal where high torque is required. With a super sharp 23° Streaker® point and 15 threads-per-inch twin lead, you get quick and easy penetration into 20-25 gauge metal studs
Attaches light-gauge metal to metal where high torque is required. With a super sharp 23° Streaker® point and 15 threads-per-inch twin lead, you get quick and easy penetration into 20-25 gauge metal studs
Specifications
Application:Metal to Metal
Bit Tip:Phillips Bit Tip
Coating:Phosphate
Gauge:7
Head Type:Pan Head
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - 4 amps minimum and RPM range of 0 to 4,000.
- The pan head is fully seated when the head is flush with the work surface.
- Overdriving my result in fastener failure or strip out of the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
Attaches light-gauge metal to metal where high torque is required. With a super sharp 23° Streaker® point and 15 threads-per-inch twin lead, you get quick and easy penetration into 20-25 gauge metal studs
Specifications
Application:Metal to MetalBit Tip:Phillips Bit TipCoating:PhosphateGauge:7Head Type:Pan HeadLength:7/16-inPackage Type:1 LBThread Type:Fine Thread