• Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
• The modified truss head design provides a larger load bearing surface for better holding power.
• Grabber fine thread modified truss head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp twin lead thread screws drive faster and hold better in light gauge metal and wood.
• Grabber’s extra sharp 23˚ Streaker® point design starts immediately and is much less likely to flop over.

Designed for light gauge metal applications where low profile head exposure is desired.  Super sharp 23° Streaker® point means quick and easy penetration into metal (25-20 ga.), while wafer head provides greater bearing surface. The right screw for K-lath installation. Superior GrabberGard exterior grade coating provides additional corrosion protection.

Specifications:
Gauge:                #8
Length:               1-1/4-in
Head Type:          Wafer framing
Recess Type:       #2 Phillips
Thread Type:       Twin lead
Coating:              GrabberGard® superior corrosion protection.

Installation Guidelines:

Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - 4 amps minimum and RPM range of 0 to 4,000.

• The wafer head is fully seated when the head is flush with the work surface.
• Overdriving my result in fastener failure or strip out of the work surface.
• The fastener must penetrate beyond the metal three full thread pitches.

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved.