Grabber | 8 x 1-5/8-in Phillips, Modified Truss Head, Fine Thread, Streaker® Point Screws (Bulk)

Grabber®

8 x 1-5/8-in Phillips, Modified Truss Head, Fine Thread, Streaker® Point Screws (Bulk)

Item Number: 3140Z

Designed for light-gauge metal applications where low-profile head exposure is desired. Super sharp 23° Streaker® point means quick and easy penetration into metal (25-20 ga.), while wafer head provides greater bearing surface. The right screw for K-lath installation.

Specifications

Application:Drywall To Light-Gauge Metal, Metal to Metal

Bit Tip:Phillips Bit Tip

Coating:Clear Zinc

Gauge:8

Head Type:Modified Truss Head

Length:1-5/8-in

Package Type:Bulk

Point Type:23° Streaker® Point

Thread Type:Fine Thread

Submittal Sheet Wafer Head Streaker Screws (220)

Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
The modified truss head design provides a larger load bearing surface for better holding power.
Grabber fine thread modified truss head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp twin lead thread screws drive faster and hold better in light gauge metal and wood.
Grabber’s extra sharp 23˚ Streaker® point design starts immediately and is much less likely to flop over.

Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - 4 amps minimum and RPM range of 0 to 4,000.

The wafer head is fully seated when the head is flush with the work surface.
Overdriving my result in fastener failure or strip out of the work surface.
The fastener must penetrate beyond the metal three full thread pitches.

Light gauge steel framing. K-lath installation

All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 and ASTM C1002 specifications and requirements.