• Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
• The modified truss head design provides a larger load bearing surface for better holding power.
• Grabber drill point modified truss head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
• Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.

Designed for heavy gauge metal applications where low profile head exposure is desired.  Wafer head provides a greater bearing surface than Pan or Hex Drillers, with a low-profile head exposure. For 20-12 gauge steel.

Specifications:
Gauge:                #8
Length:               1-in
Head Type:          Wafer framing
Recess Type:       #2 Phillips
Thread Type:       Single lead
Coating:              Clear zinc

Installation Guidelines:
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 2,500.

• The wafer head is fully seated when the head is flush with the work surface.
• Overdriving my result in fastener failure or strip out of the work surface.
• The fastener must penetrate beyond the metal three full thread pitches.

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved.