Lag-Master™ is a multi-purpose wood fastener for general wood construction, ledger boards, laminated beams, under-deck connections, and dimensional lumber. Featuring 3/8 hex drive head and draw-tite shank that pull wood members tightly together. Type-17 cutter point eliminates pre-drilling. Mechanical galvanized exterior technology for corrosion resistance.
- ICC compliant - ICC-ESR#3531
Performance Data:
Application: Structural
- wood-to-wood construction
- decks, docks and boardwalks
- retaining walls
- laminated beams
- rim to joist
- joist and ledger
- dimensional lumber
- deck and fence hardware
- under-deck connections
Compliance with the following codes:
- 2015, 2012, 2009 International Building Code® (IBC)
- 2015, 2012, 2009 International Residential Code® (IRC)(IBC)
- All local code requirements must be followed and a design professional should be consulted for proper spacing requirements.
- bend yield 150,000 (psi)
Lag-Master is a structural corrosion resistant heavy duty wood screw recognized by ICC in ESR 3531 for applications such as, landscape timbers, fences, decks, headers, stair stringers, attaching rafter or trusses to the top plate and more. Lag-Master fasteners may be used in place of ¼” and 3/8" lag screws and is code approved for use in treated lumber. Its friction reducing exterior coating, type 17 point and aggressive 10 TPI threads zip right in to the densest woods.
Lag-Master timber fasteners are mechanically galvanized coated against corrosion B695 Class 55. Grabber’s galvanized coating is ACQ compliant, and is may be used in place of Hot Dipped Galvanized products as described ASTM A153.
Lag-Master™ is a multi-purpose wood fastener for general wood construction, ledger boards, laminated beams, under-deck connections, and dimensional lumber. Featuring 3/8 hex drive head and draw-tite shank that pull wood members tightly together. Type-17 cutter point eliminates pre-drilling. Mechanical galvanized exterior technology for corrosion resistance.
- ICC compliant - ICC-ESR#3531
Performance Data:
Application: Structural
- wood-to-wood construction
- decks, docks and boardwalks
- retaining walls
- laminated beams
- rim to joist
- joist and ledger
- dimensional lumber
- deck and fence hardware
- under-deck connections
Compliance with the following codes:
- 2015, 2012, 2009 International Building Code® (IBC)
- 2015, 2012, 2009 International Residential Code® (IRC)(IBC)
- All local code requirements must be followed and a design professional should be consulted for proper spacing requirements.
- bend yield 150,000 (psi)
Lag-Master is a structural corrosion resistant heavy duty wood screw recognized by ICC in ESR 3531 for applications such as, landscape timbers, fences, decks, headers, stair stringers, attaching rafter or trusses to the top plate and more. Lag-Master fasteners may be used in place of ¼” and 3/8" lag screws and is code approved for use in treated lumber. Its friction reducing exterior coating, type 17 point and aggressive 10 TPI threads zip right in to the densest woods.
Lag-Master timber fasteners are mechanically galvanized coated against corrosion B695 Class 55. Grabber’s galvanized coating is ACQ compliant, and is may be used in place of Hot Dipped Galvanized products as described ASTM A153.
Specifications
Application:Wood to Wood
Bit Tip:Hex Nut Driver
Coating:Mechanical Galvanized
Gauge:14
- 3/8-in hex washer head provides for ultimate torque and higher load-bearing capability in structural wood to wood applications.
- DrawTite™ shank pulls wood members rather than forcing them apart as the fastener drives in and seats.
- Lag-Master timber fasteners are mechanically galvanized against corrosion to ASTM B695 Class 55. Grabber’s galvanized coating is ACQ compliant.
- The type 17 self drilling point starts and drives into most common wood species without needing to pre-drill.
- General wood to wood construction, decks, docks & boardwalks, retaining walls, laminated beams, rim to Joist, underdeck connections
- Lag-Master is a structural, corrosion-resistant, heavy-duty wood screw listed in ICC ESR-3531 for use in engineered wood-to-wood connections.
Lag-Master™ is a multi-purpose wood fastener for general wood construction, ledger boards, laminated beams, under-deck connections, and dimensional lumber. Featuring 3/8 hex drive head and draw-tite shank that pull wood members tightly together. Type-17 cutter point eliminates pre-drilling. Mechanical galvanized exterior technology for corrosion resistance.
- ICC compliant - ICC-ESR#3531
Performance Data:
Application: Structural- wood-to-wood construction
- decks, docks and boardwalks
- retaining walls
- laminated beams
- rim to joist
- joist and ledger
- dimensional lumber
- deck and fence hardware
- under-deck connections
Compliance with the following codes:
- 2015, 2012, 2009 International Building Code® (IBC)
- 2015, 2012, 2009 International Residential Code® (IRC)(IBC)
- All local code requirements must be followed and a design professional should be consulted for proper spacing requirements.
- bend yield 150,000 (psi)
Lag-Master is a structural corrosion resistant heavy duty wood screw recognized by ICC in ESR 3531 for applications such as, landscape timbers, fences, decks, headers, stair stringers, attaching rafter or trusses to the top plate and more. Lag-Master fasteners may be used in place of ¼” and 3/8" lag screws and is code approved for use in treated lumber. Its friction reducing exterior coating, type 17 point and aggressive 10 TPI threads zip right in to the densest woods.
Lag-Master timber fasteners are mechanically galvanized coated against corrosion B695 Class 55. Grabber’s galvanized coating is ACQ compliant, and is may be used in place of Hot Dipped Galvanized products as described ASTM A153.
Specifications
Application:Wood to WoodBit Tip:Hex Nut DriverCoating:Mechanical GalvanizedGauge:14Head Type:Hex HeadLength:5-inPackage Type:PailPoint Type:Type 17 PointProduct Family:LAG-MASTER™Thread Type:Coarse Thread