Grabber®
8 x 1-1/4-in LOX® 2, Dome Head, Fine Thread, Tek 3 Drill Point, GrabberGard® Gray Screws (Collated)
Item Number: CW8125L2RG
Attaches heavy-gauge metal to metal applications.
Specifications
| Application | Metal to Metal |
|---|---|
| Bit Tip | #2 LOX® |
| Head Type | Dome Head |
| Thread Type | Fine |
| Coating | GrabberGard® Gray |
| Point Type | Tek 3 Drill Point |
| Gauge | 8 |
| Metric Gauge | 4.2 |
| Length | 1 1/4 in. |
| Head Diameter | 0.246 in. |
| Package Type | Collated |
| Amount | 1000 |
| Product Line | SuperDrive® Collated Fasteners |
Benefits
- LOX® 2 recess provides ultimate torque.
- The dome head design provides better holding power in metal to heavy-gauge metal applications.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
Recommended Application
- Heavy-gauge metal to metal applications.
Installation Guidelines
- Suggested screwgun specification for optimal performance – Size #8, up to 2,500 RPM.
- The head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener or stripout within the substrate.
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.