Grabber®
6 x 1-1/4-in Phillips, Bugle Head, Hi-Lo Thread, Phosphate Screws (Bulk)
Item Number: 368HLA
High-low alternating threads for mixed materials, increased pull-out, and stronger fastening. Sharper threads make driving easier and provide better holding power. Standard bugle head. Grabber American made screws are special order inventory. Please contact your local Grabber Pro for current price and availability.
Specifications
| Application | Drywall To Light-Gauge Metal or Wood |
|---|---|
| Bit Tip | Phillips |
| Head Type | Bugle Head |
| Thread Type | High-Low Alternating |
| Coating | Phosphate |
| Point Type | 23° Streaker® Point |
| Gauge | 6 |
| Metric Gauge | 3.5 |
| Length | 1 1/4 in. |
| Head Diameter | 0.325 in. |
| Package Type | Bulk |
| Amount | 8000 |
Available in other lengths
- 1 in. 168HLA
- 1 1/4 in. 368HLA
- 2 in. 768HLA6
Benefits
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- Head dies are changed more frequently, screws are more evenly heat treated resulting in better formed and stronger heads that resist popping off as screws seat.
- Extra sharp alternating or high-low threads are designed to drive quicker and provide better holding power in drywall to light gauge metal or wood applications.
- Grabber’s extra sharp 23˚ Streaker® point design starts immediately and is much less likely to flop over.
Recommended Application
Drywall to light gauge steel or wood.
Installation Guidelines
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #6 - #8, up to 4,000 RPM.
- For gypsum board, the bugle head is fully seated when the screw is below the surface of the wallboard in accordance with Section 7.2.2 of ASTM C1002.
- Overdriving may result in failure of the fastener. The fastener must penetrate beyond the metal a minimum of three full threads.
Special Features
Made in America. Grabber American Made Screws are SPECIAL ORDER INVENTORY. CONTACT GRABBER FOR CURRENT PRICE AND AVAILABILITY.
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1002 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.