Grabber®
8 x 1-3/4-in LOX Drive, Coarse Thread, Yellow Zinc Screws (Collated)
Item Number: C8175LYZ
Attaches subfloor and wood to wood
Specifications
| Application | Subfloor to Wood |
|---|---|
| Bit Tip | LOX® Bit Tip |
| Head Type | Flat Head |
| Thread Type | Coarse |
| Coating | Yellow Zinc |
| Point Type | 23° Grabber® Point |
| Gauge | 8 |
| Metric Gauge | 4.2 |
| Length | 1 3/4 in. |
| Head Diameter | 0.346 in. |
| Package Type | Collated |
| Amount | 1000 |
| Product Line | SuperDrive® Collated Fasteners |
Benefits
- LOX® recess was designed for todays screw guns and for applications where high-torque is required. LOX® will not strip out like most other recesses.
- The flat head design provides better holding power in wood to wood applications. Special nibs self-countersink as the screw seats.
- Grabber wood screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. This means the screws will drive faster and will hold better.
- The Type 17 point means you don't need to pre-drill the wood before you drive in the screws in most common wood species.
Recommended Application
Subfloor construction
Installation Guidelines
Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance - Sizes #6 - #10, up to 4,000 RPM. Overdriving may result in failure of the fastener.
Special Features
Collated
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASME B18.6.1. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.