Grabber®
10 x 1-1/2-in Phillips, Bugle Head, Coarse Thread, Phosphate Laminator Screws (1-LB)
Item Number: X12
Laminates gypsum board. Heavy gauge laminator screws are also ideal for wood to wood connection.
Specifications
| Application | Drywall Laminating |
|---|---|
| Bit Tip | #2 Phillips |
| Head Type | Bugle Head |
| Thread Type | Coarse |
| Coating | Phosphate |
| Point Type | 23° Grabber® Point |
| Gauge | 10 |
| Length | 1 1/2 in. |
| Head Diameter | 0.343 in. |
| Package Type | 1-LB |
| Amount | 136 |
| Threads Per Inch | 8 |
| Metric Size | 4.8 |
Also available in
- Bulk Box 12
- 5-LB VB12
- 1-LB X12
Available in other lengths
- 1 1/2 in. X12
- 3 1/2 in. X1200
- 4 in. X1300
Benefits
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- Head dies are changed more frequently, screws are more evenly heat treated resulting in better formed and stronger heads that resist popping off as screws seat.
- Grabber drywall screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. This means the screws will drive faster and will hold better.
- Grabber’s extra sharp 23˚ Grabber® point design starts immediately and is much less likely to flop over.
Recommended Application
- For laminating drywall.
Installation Guidelines
- Suggested screwgun specification for optimal performance – Size #6 - #10, up to 4,000 RPM.
- For gypsum board, the bugle head is fully seated when the screw is below the surface of the wallboard in accordance with Section 7.2.2 of ASTM C1002.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1002 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.