Grabber®
10 x 1-7/16-in Phillips, Wafer Head, Fine Thread, Drill Point, Clear Zinc Screws (1-LB)
Item Number: X101716
For sheathing attachment to heavy gauge cold-formed steel-to-steel attachment, 33-97 mil (20-12ga).
Specifications
| Application | Sheathing to Metal |
|---|---|
| Bit Tip | #2 Phillips |
| Head Type | Wafer Head |
| Thread Type | Fine |
| Coating | Clear Zinc |
| Point Type | Drill Point |
| Gauge | 10 |
| Metric Gauge | 4.8 |
| Length | 1 7/16 in. |
| Head Diameter | 0.453 in. |
| Package Type | 1-LB |
| Amount | 136 |
| Threads Per Inch | 24 |
Also available in
- Bulk Box 101716
- 5-LB VB101716
- 1-LB X101716
Available in other lengths
- 1 7/16 in. X101716
- 1 5/8 in. X10158W4
Benefits
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- Thin wafer head design provides for a larger load bearing surface and better holding power in sheathing to heavy gauge metal applications.
- Grabber heavy gauge sheathing screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
Recommended Application
Attach sheathing, 3/16" to 3/4", to cold-formed steel 33 mil or thicker.
Installation Guidelines
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 2,500 RPM.
- The screw head is fully seated when the screw head is flush with the surface of the material.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener.
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.