Grabber®
10 x 1-7/8-in LOX® 2, Flat Head, Fine Thread, #3.5 Pilot Point, Clear Zinc Screws (Collated)
Item Number: CM10178SDZJBW
Attaches sheathing to heavy gauge metal
Specifications
| Application | Sheathing to Metal |
|---|---|
| Bit Tip | #2 LOX® |
| Head Type | Flat Head |
| Thread Type | Fine |
| Coating | Clear Zinc |
| Point Type | #3.5 Pilot Point |
| Gauge | 10 |
| Metric Gauge | 4.8 |
| Length | 1 7/8 in. |
| Head Diameter | 0.354 in. |
| Package Type | Collated |
| Amount | 1000 |
| Product Line | SuperDrive® Collated Fasteners |
| Threads Per Inch | 18 |
Benefits
- Grabber's LOX® recess provides ultimate torque.
- The flat head design provides better holding power in sheathing to heavy-gauge metal applications.
- Grabber heavy-gauge sheathing screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing. Special wings clear away sheathing material as the screw drives eliminating jacking.
Recommended Application
Attach sheathing to steel 33 mil or thicker.
Installation Guidelines
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 2,500 RPM, Size #12 - #14, up to 1,800 RPM..
- The flat head is fully seated when the head is flush with the substrate.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
Special Features
Collated
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.