Grabber®
10 x 2-1/2-in LOX® 3, Flat Head, Alternating Thread, #3 Pilot Point, GrabberGard® Gray Screws (Bulk)
Item Number: 10250SDL3M
Attaches sheathing and engineered wood products to metal up to 0.175-in.
Specifications
| Application | Sheathing and engineered wood products to metal |
|---|---|
| Bit Tip | #3 LOX® |
| Head Type | Flat Head |
| Thread Type | High-Low Alternating |
| Coating | GrabberGard® Gray |
| Point Type | Pilot Point |
| Gauge | 10 |
| Metric Gauge | 4.8 |
| Length | 2 1/2 in. |
| Head Diameter | 0.246 in. |
| Package Type | Bulk |
| Amount | 2000 |
Benefits
- LOX® 3 recess provides ultimate torque.
- The flat head design provides better holding power in sheathing and engineered wood products to heavy-gauge metal applications.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
Recommended Application
Sheathing and engineered wood products to heavy-gauge metal applications.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Sizes #10 - #12, up to 2,500 RPM.
- The flat head is fully seated when the head is flush with the work surface.
- Overdriving my result in fastener failure or strip out of the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.