Grabber®
10 x 2-1/2-in LOX® 3, Flat Head, Alternating Thread, #3 Winged Pilot Point, Yellow Zinc Screws (Collated)
Item Number: C10250L3YZE
Attaches sheathing and engineered wood products to metal up to 0.175-in.
Specifications
| Bit Tip | #3 LOX® |
|---|---|
| Head Type | Flat Head |
| Thread Type | High-Low Alternating |
| Coating | Yellow Zinc |
| Gauge | 10 |
| Metric Gauge | 5.2 |
| Length | 2 1/2 in. |
| Head Diameter | 0.368 in. |
| Package Type | Collated Box |
| Amount | 1000 |
| Product Line | SuperDrive® Collated Fasteners |
| Threads Per Inch | 15 Hi-Lo |
Benefits
- LOX® 3 recess provides ultimate torque.
- The flat head design provides better holding power in sheathing and engineered wood products to heavy-gauge metal applications.
- Grabber heavy-gauge metal screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
Recommended Application
Sheathing and engineered wood products to heavy-gauge metal applications.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Sizes #10 - #12, up to 2,500 RPM.
- The flat head is fully seated when the head is flush with the work surface.
- Overdriving my result in fastener failure or strip out of the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
Special Features
Wings
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.