Grabber®
10 x 3/4-in X-Drive, Revised Flat Pan Head, Fine Thread, Sharp Point, GrabberGard® Green Screws (Collated)
Item Number: CFP101875XSC3
Metal to metal up to 0.033-in.
Specifications
| Application | Metal to Metal |
|---|---|
| Bit Tip | X-Drive |
| Head Type | Revised Flat Pan Head |
| Thread Type | Fine |
| Coating | GrabberGard® Green |
| Point Type | Sharp Point |
| Gauge | 10-18 |
| Metric Gauge | 4.8 |
| Length | 3/4 in. |
| Head Diameter | 0.246 in. |
| Package Type | Collated |
| Amount | 1000 |
| Product Line | SuperDrive® Collated Fasteners |
Benefits
- Grabber’s X-Drive™ is a precision recess providing for a consistent, reliable performance and is less likely to wobble or strip-out.
- Under head serrations lock tight in light gauge metal to metal applications.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Grabber’s extra sharp 23˚ Streaker® point design starts immediately and is much less likely to flop over.
Recommended Application
Metal to metal applications up to 0.033-in.
Installation Guidelines
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #7 - #10, up to 4,000 RPM.
- The head is fully seated when the bearing surface of the of the head is flush with the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener or stripout within the substrate.
Special Features
Underhead serrations - Collated
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.