Grabber®
11 x 2-3/8-in LOX® 3, Modified Pan Head, Hi-Lo Thread, Drill Point, GrabberGard® Gray Screws (1-LB)
Item Number: XDMWH238G2
Grabber Xtek metal to wood screws have been specifically designed for attaching metal 33-97 mil (20-12ga) to wood members.
Specifications
| Application | Metal to Wood |
|---|---|
| Bit Tip | #3 LOX® |
| Head Type | Modified Pan head |
| Thread Type | High-Low Alternating |
| Coating | GrabberGard® Gray |
| Point Type | Drill Point |
| Gauge | 11 |
| Metric Gauge | 5.2 |
| Length | 2 3/8 in. |
| Head Diameter | 0.356 in. |
| Package Type | 1-LB |
| Amount | 61 |
| Threads Per Inch | 15 Hi-Lo |
Also available in
- Bulk Box DMWH238G2
- 1-LB XDMWH238G2
Benefits
- LOX® 3 recess was designed for today's screw guns and for applications where high-torque is required. LOX® will not strip out like most other recesses.
- Under head serrations lock tight in metal to wood applications.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal.
Recommended Application
Attach heavy gauge steel 33-97 mil (20-12ga) to wood members.
Installation Guidelines
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #11 up to 2,500 RPM.
- The head is fully seated when the load bearing part of the head is flush with the substrate.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener or stripout within the substrate.
Special Features
Underhead serrations
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.