Grabber®
12 x 2-1/2-in #3 Phillips, Flat Head, Fine Thread, #3 Pilot Point Clear Zinc Screws (Bulk)
Item Number: 12250F3
Attaches sheathing to heavy gauge metal
Specifications
| Application | Sheathing to Metal |
|---|---|
| Bit Tip | #3 Phillips |
| Head Type | Flat Head |
| Thread Type | Fine |
| Coating | Clear Zinc |
| Point Type | Tek 3 Drill Point |
| Gauge | 12 |
| Metric Gauge | 5.5 |
| Length | 2 1/2 in. |
| Head Diameter | 0.413 in. |
| Package Type | Bulk Box |
| Amount | 1500 |
| Threads Per Inch | 24 |
Benefits
- Grabber’s Pro-Fit™ #3 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The flat head design provides better holding power in sheathing to heavy-gauge metal applications.
- Grabber heavy-gauge sheathing screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
Recommended Application
Attach sheathing to steel 33 mil or thicker.
Installation Guidelines
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 2,500 RPM, Size #12 - #14, up to 1,800 RPM..
- The flat head is fully seated when the head is flush with the substrate.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.