Grabber®
12 x 2-3/4-in #3 Phillips, Flat Head, Fine Thread, #3 Winged Pilot Point, GrabberGard® Gray Screws (Count Pack)
Item Number: 12275FW3RG-250
Attaches sheathing to heavy gauge metal
Specifications
| Application | Sheathing to Metal |
|---|---|
| Bit Tip | #3 Phillips |
| Head Type | Flat Head |
| Thread Type | Fine |
| Coating | GrabberGard® Gray |
| Point Type | Tek 3 Winged Drill Point |
| Gauge | 12 |
| Metric Gauge | 5.5 |
| Length | 2 3/4 in. |
| Head Diameter | 0.413 in. |
| Package Type | Box |
| Amount | 250 |
| Threads Per Inch | 24 |
Available in other lengths
- 2 in. 12200FW3RG-250
- 2 1/2 in. 12250FW3RG-250
- 2 3/4 in. 12275FW3RG-250
Benefits
- Grabber’s Pro-Fit™ #3 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The flat head design provides better holding power in sheathing to heavy-gauge metal applications.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing. Special wings clear away sheathing material as the screw drives eliminating jacking.
Recommended Application
Attach sheathing to steel 33 mil or thicker.
Installation Guidelines
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 2,500 RPM, Size #12 - #14, up to 1,800 RPM..
- The flat head is fully seated when the head is flush with the substrate.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
Special Features
Special Wings on the drill point.
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.