Grabber®
12 x 3/4-in X-Drive, Revised Flat Pan Head, Fine Thread, Drill Point, GrabberGard® Green Screws (Bulk)
Item Number: FP121875XDC35
For framing steel 33 mil or thicker.
Specifications
| Application | Metal to Metal |
|---|---|
| Bit Tip | X-Drive |
| Head Type | Revised Flat Pan Head |
| Thread Type | Fine |
| Coating | GrabberGard® Green |
| Point Type | Drill Point |
| Gauge | 12 |
| Metric Gauge | 5.5 |
| Length | 3/4 in. |
| Head Diameter | 0.344 in. |
| Package Type | Bulk |
| Amount | 8000 |
Benefits
- Grabber’s X-Drive is a precision recess providing for a consistent, reliable performance and is less likely to wobble or strip-out.
- Under head serrations lock tight in metal to metal applications.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
Recommended Application
Framing steel 33 mil or thicker.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – Size #10 - #12, up to 2,500 RPM.
- The head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving my result in fastener failure or strip out of the work surface.
Special Features
4 underhead serrations
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.