Grabber®
12 x 7/8-in LOX Drive, Flat Pan Head, Fine Thread, Tek 3.5 Drill Point GrabberGard® Gray Screws (Bulk)
Item Number: FP121878LRG
Attaches heavy gauge 33-97 mil (20-12 ga.) metal to metal. Unique flat pan head design.
ICC-ES Evaluated
ESR-1271 Report
Specifications
| Application | Metal to Metal |
|---|---|
| Bit Tip | LOX® Bit Tip |
| Head Type | Flat Pan Head |
| Thread Type | Fine |
| Coating | GrabberGard® Gray |
| Point Type | Drill Point |
| Gauge | 12 |
| Metric Gauge | 5.5 |
| Length | 7/8 in. |
| Head Diameter | 0.365 in. |
| Package Type | Bulk |
| Amount | 7500 |
Benefits
- Grabber's LOX® recess provides ultimate torque.
- Grabber screws are more evenly heat treated and tempered resulting consistent and reliable performance.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
Recommended Application
Steel to steel connection. Steel framing, straping, fixtures and more.
Installation Guidelines
- Suggested screwgun specification for optimal performance – Sizes #6 - #10, Up to 2500 RPM, Size #12, Up to 1800 RPM.
- The screw is fully seated when the bearing surface of the head is flush with the substrait.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
- The fastener must penetrate beyond the metal three full thread pitches.
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. Specific fasteners are listed in ICC ESR-1271; please check the report for listed item numbers. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.