Grabber®
6 x 1-1/4-in Phillips, Bugle Head, Fine Thread, Streaker® Point, GrabberGard® Gray Screws (Collated)
Item Number: C368RG
Attaches gypsum board to light gauge steel. Extra sharp threads and Streaker point make driving easier and provide better holding power. Standard bugle head.
Specifications
| Application | Drywall To Light-Gauge Metal |
|---|---|
| Bit Tip | #2 Phillips |
| Head Type | Bugle Head |
| Thread Type | Fine |
| Coating | GrabberGard® Gray |
| Point Type | 23° Streaker® Point |
| Gauge | 6 |
| Metric Gauge | 3.5 |
| Length | 1 1/4 in. |
| Head Diameter | 0.325 in. |
| Package Type | Collated Box |
| Amount | 1000 |
| Product Line | SuperDrive® Collated Fasteners |
| Threads Per Inch | 15 |
Benefits
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- Head dies are changed more frequently, screws are more evenly heat treated resulting in better formed and stronger heads that resist popping off as screws seat.
- GrabberGard® limited lifetime exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Grabber’s extra sharp 23˚ Streaker® point design starts immediately and is much less likely to flop over.
Recommended Application
Multiple layers of gypsum board and rigid insulation attachment to light gauge steel. Other compatible material attachment to light gauge steel. Superior corrosion resistance.
Installation Guidelines
Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Gauges #6 - #10, up to 4,000 RPM.
- For gypsum board, the bugle head is fully seated when the screw is below the surface of the wallboard in accordance with Section 7.2.2 of ASTM C1002.
- Overdriving my result in failure of the fastener.
- The fastener must penetrate beyond the metal a minimum of three full threads.
Special Features
Collated
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1002 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.