Grabber®
6 x 1-1/8 Phillips, Scavenger® Head, Hi-Lo Thread, Streaker® Point Phosphate Screws (Bulk)
Item Number: 268SHL
Designed with alternating hi-lo threads for drywall to light metal or wood applications. With a super sharp 23 degree Streaker Point you get quick and easy penetration into metal or wood studs.
Specifications
| Application | Drywall to Wood |
|---|---|
| Bit Tip | #2 Phillips |
| Head Type | Scavenger® Head |
| Thread Type | High-Low Alternating |
| Coating | Phosphate |
| Point Type | 23° Streaker® Point |
| Gauge | 6 |
| Metric Gauge | 3.5 |
| Length | 1 1/8 in. |
| Head Diameter | 0.325 in. |
| Package Type | Bulk Box |
| Amount | 10000 |
| Threads Per Inch | 18 Hi-Lo |
Also available in
- Bulk Box 268SHL
- 5-LB VB268SHL
Available in other lengths
- 1 in. 168SHL
- 1 1/8 in. 268SHL
- 1 1/4 in. 368SHL
- 1 5/8 in. 468SHL
Benefits
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The unique Scavenger® double bugle head design seats cleanly into drywall eliminating the potential for paper burrs and making your finishing job much easier.
- Grabber fine thread drywall screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp twin lead alternating thread screws drive faster and will hold better in light-gauge metal and wood.
- Grabber’s extra sharp 23˚ Streaker® point design starts immediately and is much less likely to flop over.
Recommended Application
- Drywall attachment to light-gauge steel or wood.
Installation Guidelines
- Suggested screwgun specification for optimal performance – Size #6 - #8, up to 4,000 RPM.
- For gypsum board, the Scavenger® head is fully seated when the screw is below the surface of the wallboard in accordance with Section 7.2.2 of ASTM C1002.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
- The fastener must penetrate beyond the metal a minimum of three full threads.
Special Features
Scavenger® Head with alternating threads.
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1002 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.