Grabber®
6 x 1-in Phillips, Bugle Head, Coarse Thread, Yellow Zinc Screws (Bulk)
Item Number: 100YZ
Ideal for general purpose interior soft wood to wood applications. Extra sharp point and threads make driving easier and provide better holding power. Standard bugle head.
Specifications
| Application | Drywall to Wood and Wood to Wood |
|---|---|
| Bit Tip | #2 Phillips |
| Head Type | Bugle Head |
| Thread Type | Coarse |
| Coating | Yellow Zinc |
| Point Type | 23° Grabber® Point |
| Gauge | 6 |
| Metric Gauge | 3.5 |
| Length | 1 in. |
| Head Diameter | 0.325 in. |
| Package Type | Bulk Box |
| Amount | 10000 |
| Threads Per Inch | 8 |
Also available in
- Bulk Box 100YZ
- 5-LB VB100YZ
- 1-LB X100YZ
Available in other lengths
- 1 in. 100YZ
- 1 1/8 in. 200YZ
- 1 1/4 in. 300YZ
- 1 5/8 in. 400YZ
Benefits
•Grabber’s Pro-Fit™ #2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
•Head dies are changed more frequently, screws are more evenly heat treated resulting in better formed and stronger heads that resist popping off as screws seat.
•Grabber drywall screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. This means the screws will drive faster and will hold better.
•Grabber’s extra sharp 23˚ Grabber® point design starts immediately and is much less likely to flop over.
Recommended Application
Installation Guidelines
•Suggested screwgun specification for optimal performance - Size #6 - #10, up to 4,000 RPM.
•For gypsum board, the bugle head is fully seated when the screw is below the surface of the wallboard in accordance with Section 7.2.2 of ASTM C1002.
•Overdriving may result in failure of the fastener or failure of the gypsum board.