Grabber®
7 x 2-1/4-in Square Drive, Trim Head, Fine Thread, Streaker® Point, GrabberGard® Gray Screws (5-LB)
Item Number: VB18SRG
Used to attach wood, metal or plastic trim to light-gauge metal or wood. Streaker® point means quick and easy penetration while the smaller, less noticeable head provides a finished look.
Specifications
| Application | Trim to Metal or Wood |
|---|---|
| Bit Tip | #1 Square |
| Head Type | Trim Head |
| Thread Type | Fine |
| Coating | GrabberGard® Gray |
| Point Type | 23° Streaker® Point |
| Gauge | 7 |
| Metric Gauge | 3.8 |
| Length | 2 1/4 in. |
| Head Diameter | 0.219 in. |
| Package Type | 5-LB |
| Amount | 764 |
| Threads Per Inch | 15 |
Also available in
- Bulk Box 18SRG
- 5-LB VB18SRG
- 1-LB X18SRG
Benefits
- The No. 1 square recess is a precision recess designed for secure bit engagement in trim to wood or light gauge metal applications.
- Grabber trim head screws are more evenly heat treated and tempered resulting consistent and reliable performance.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Grabber’s extra sharp 23˚ Streaker® point design starts immediately and is much less likely to flop over.
Recommended Application
Trim material attachment to light gauge steel or wood.
Installation Guidelines
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #7 - #8, up to 4,000 RPM.
- The trim head is fully seated when the screw is below the surface of the material.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.