Grabber®
7 x 2-in Phillips, Scavenger® Head, Coarse Thread Phosphate Drywall Screws (Bulk)
Item Number: 508XX
Attaches gypsum board to wood. The unique Scavenger® head design helps reduce paper burrs, creating a smooth professional finish.
Specifications
| Application | Drywall to Wood |
|---|---|
| Bit Tip | #2 Phillips |
| Head Type | Scavenger® Head |
| Thread Type | Coarse |
| Coating | Phosphate |
| Point Type | 23° Grabber® Point |
| Gauge | 7 |
| Metric Gauge | 3.8 |
| Length | 2 in. |
| Head Diameter | 0.325 in. |
| Package Type | Bulk Box |
| Amount | 3200 |
| Threads Per Inch | 8 |
Available in other lengths
- 2 in. 508
- 2 in. 508XX
Benefits
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The unique Scavenger® double bugle head design seats cleanly into drywall eliminating the potential for paper burrs and making your finishing job much easier.
- Grabber drywall screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp twin lead thread screws will drive faster and hold better in light-gauge metal and wood.
- Grabber’s extra sharp 23˚ Grabber® point design starts immediately and is much less likely to flop over.
Recommended Application
- Drywall attachment to wood.
Installation Guidelines
- Suggested screwgun specification for optimal performance – Size #6 - #10, up to 4,000 RPM.
- For gypsum board, the Scavenger® head is fully seated when the screw is below the surface of the wallboard in accordance with Section 7.2.2 of ASTM C1002.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1002 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.