Grabber®
7 x 7/16-in Phillips, Pan Framing Head, Fine Thread, Streaker® Point GrabberGard® Gray Screws (Bulk)
Item Number: 23FRG
Cold-formed steel light-gauge metal to metal framing up to 0.033-in.
Specifications
| Application | Metal to Metal |
|---|---|
| Bit Tip | Phillips |
| Head Type | Pan Framing Head |
| Thread Type | Fine |
| Coating | GrabberGard® Gray |
| Point Type | Streaker® Point |
| Gauge | 7 |
| Metric Gauge | 3.8 |
| Length | 7/16 in. |
| Head Diameter | 0.305 in. |
| Package Type | Bulk |
| Amount | 15000 |
Benefits
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- Under head serrations lock tight in light gauge metal to metal applications.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Grabber’s extra sharp 23˚ Streaker® point design starts immediately and is much less likely to flop over.
Recommended Application
Cold-formed, light gauge steel framing. HVAC and sheet metal.
Installation Guidelines
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #7 - #10, up to 4,000 RPM.
- The head is fully seated when the bearing surface of the head is flush with the work surface.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
Special Features
Serrations Under Head
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.