Grabber®
7 x 9/16-in Phillips, Modified Truss Head, Fine Thread, Vector™ Point Clear Zinc Screws (1-LB)
Item Number: X31ZV
Designed for light gauge metal 18-30 mil (25-20ga) applications where low profile head is desired. Super sharp Vector™ point means quick and easy penetration into metal, while the modified truss head provides greater bearing surface. The right screw for K-lath installation and framing applications.
ICC-ES Evaluated
ESR-5429 Report
Specifications
| Application | Metal to Metal |
|---|---|
| Bit Tip | #2 Phillips |
| Head Type | Modified Truss Head |
| Thread Type | Fine |
| Coating | Clear Zinc |
| Point Type | Vector™ Point |
| Gauge | 7 |
| Metric Gauge | 3.8 |
| Length | 9/16 in. |
| Head Diameter | 0.447 in. |
| Package Type | 1-LB |
| Amount | 259 |
| Threads Per Inch | 20 |
Also available in
- Bulk Box 31ZV
- 5-LB VB31ZV
- 1-LB X31ZV
Benefits
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The modified truss head design provides a larger load bearing surface for better holding power. Under head serrations lock tight in metal to metal applications.
- Grabber fine thread modified truss head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming.
- The super-sharp Vector™ point starts and drives up to 40% faster than most other fine thread lath and metal framing screws.
Recommended Application
Light gauge 18-30 mil (25-20ga) steel framing. K-lath installation.
Installation Guidelines
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #6 - #10, up to 4,000 RPM.
- The Modified Truss Head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener or stripout within the substrate.
Special Features
Vector™ Point - Serrations Under Head
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 and ASTM C1002 specifications and requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.