Grabber®
8 x 1-1/2-in LOX® Drive, Flat Head, Fine Thread, Streaker® Point, Yellow Zinc Screws (1-LB)
Item Number: XS8150JBWYZ
Attaches sheathing & subfloor to light gauge metal.
Specifications
| Application | Plywood to Metal or Wood |
|---|---|
| Bit Tip | LOX® Bit Tip |
| Head Type | Flat Head |
| Thread Type | Fine |
| Coating | Yellow Zinc |
| Point Type | Streaker® Point |
| Gauge | 8 |
| Metric Gauge | 4.2 |
| Length | 1 1/2 in. |
| Head Diameter | 0.354 in. |
| Package Type | 1-LB |
| Amount | 178 |
Benefits
- Grabber's LOX® recess provides ultimate torque.
- The flat head design provides better holding power in sheathing to light-gauge metal applications.
- Grabber's light-gauge metal screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and hold better.
- The self-tapping Streaker® Point penetrates through sheathing and into light-gauge metal.
Recommended Application
Attach sheathing to light-gauge metal up to 33 mil.
Installation Guidelines
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #7 - #8, up to 4,000 RPM.
- For wood, the screw is fully seated when the top of the head is flush with the work surface. The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.