Grabber®
8 x 1-1/4-in LOX® 2 drive, Flat Wafer Head, Fine Thread GrabberGard® Gray Screws (Bulk)
Item Number: GHS8114LG
Attaches high density sheathing to wood or light gauge metal
Specifications
| Application | High Density Board to Wood |
|---|---|
| Bit Tip | #2 LOX® |
| Head Type | Flat Wafer Head |
| Thread Type | Fine |
| Coating | GrabberGard® Gray |
| Gauge | 8 |
| Metric Gauge | 4.2 |
| Length | 1 1/4 in. |
| Head Diameter | 0.372 in. |
| Package Type | Bulk Box |
| Amount | 5000 |
| Threads Per Inch | 15 |
Available in other lengths
- 1 1/4 in. GHS8114LG
- 1 5/8 in. GHS8158LG
Benefits
- LOX® recess was designed for today's screwguns and for applications where high-torque is required. LOX® will not strip out like most other recesses.
- The wafer head with nibs design provides better holding power in high density and cement board applications. Special nibs self countersink as the screw seats.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Grabber’s extra sharp 23˚ Streaker® point design starts immediately and is much less likely to flop over.
Recommended Application
- Attaches high density sheathing to wood or light gauge metal. Superior corrosion resistance.
Installation Guidelines
- Suggested screwgun specification for optimal performance – Size #8, up to 4,000 RPM.
- For metal applications, the fastener must penetrate beyond the material a minimum of three full threads.
- Overdriving may result in failure of the fastener or stripout with the substrate..
Special Features
Underhead Nibs
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1002 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.