Grabber®
8 x 1-1/4-in Phillips, Flat Wafer Head, Fine Thread, Winged Drill Point, GrabberGard® Gray Screws (Bulk)
Item Number: 8125SDW
For attaching high density sheathing to heavy gauge cold-formed steel, 33-97 mil (20-12ga).
Specifications
| Application | Sheathing to Metal |
|---|---|
| Bit Tip | Phillips |
| Head Type | Wafer Head |
| Thread Type | Fine |
| Coating | GrabberGard® Gray |
| Point Type | Winged Drill Point |
| Gauge | 8 |
| Metric Gauge | 4.2 |
| Length | 1 1/4 in. |
| Head Diameter | 0.413 in. |
| Package Type | Bulk |
| Amount | 5000 |
Available in other lengths
- 1 1/4 in. 8125SDW
- 1 5/8 in. 8158SDW
Benefits
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- Thin wafer head design provides for a larger load bearing surface and better holding power in sheathing to heavy gauge metal applications.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing. Special wings clear away sheathing material as the fastener drives in.
Recommended Application
Attach sheathing, 3/16" to 3/4", to cold-formed steel 33 mil or thicker.
Installation Guidelines
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 2,500 RPM.
- The screw head is fully seated when the screw head is flush with the surface of the material.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener.
Special Features
Winged Drill Point
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.