Grabber®
8 x 1/2-in Phillips, Reduced Modified Truss Head, Fine Thread, Drill Point Clear Zinc Screws (Collated)
Item Number: C34DZ
Attaches heavy gauge 33-97 mil (20-12 ga.) metal to metal.
Specifications
| Application | Metal to Metal |
|---|---|
| Bit Tip | #2 Phillips |
| Head Type | Modified Truss Head |
| Thread Type | Fine |
| Coating | Clear Zinc |
| Point Type | Drill Point |
| Gauge | 8 |
| Metric Gauge | 4.2 |
| Length | 1/2 in. |
| Head Diameter | 0.364 in. |
| Package Type | Collated Box |
| Amount | 2000 |
| Product Line | SuperDrive® Collated Fasteners |
| Threads Per Inch | 18 |
Benefits
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The Reduced Modified Truss Head provides a sufficient load bearing surface for better holding power, but is small enough to fit into tight areas.
- Grabber reduced modified truss head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
Recommended Application
Cold-formed, heavy gauge steel framing.
Installation Guidelines
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #6 - #10, up to 4,000 RPM.
- The head is fully seated when the bearing surface of the head is flush with the work surface.
- Overdriving may result in failure of the fastener.
Special Features
Collated
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.