Grabber®
8 x 1/2-in Slotted Hex Washer Head, Fine Thread, Streaker® Point, Clear Zinc Screws (Barrel)
Item Number: SL03-50M
A fine thread screw for metal-to-metal framing applications. High-torque hex head, which can be easily removed when necessary. Super sharp Streaker point designed to penetrate steel quickly and easily.
Specifications
| Application | Metal to Metal |
|---|---|
| Bit Tip | Nut Driver |
| Head Type | Hex Head |
| Thread Type | Fine |
| Coating | Clear Zinc |
| Point Type | Streaker® Point |
| Gauge | 8 |
| Metric Gauge | 4.2 |
| Length | 1/2 in. |
| Head Diameter | 0.013 in. |
| Package Type | Barrel |
| Amount | 50000 |
Available in other lengths
- 1/2 in. SL03-50M
- 3/4 in. 08075HSP-35M
Benefits
- Hex washer head design provides maximum torque and holding power in metal to metal applications.
- The hex washer head design provides a larger load bearing surface for better holding power.
- Grabber screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. This means the screws will drive faster and will hold better.
- Grabber’s Streaker® point design starts immediately and drives into light-gauge metal and is much less likely to flop over.
Recommended Application
For attaching metal to metal.
Installation Guidelines
- Suggested screwgun specification for optimal performance – Size #8 - #10, up to 4,000 RPM.
- The hex head is fully seated when the bottom of the head is flush with the work surface.
- Overdriving may result in fastener failure or strip out.
- The fastener must penetrate beyond the metal three full thread pitches.
Special Features
Slotted Hex Head allowing use of a flat head screwdriver.
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.