Grabber®
8 x 1-5/8-in Phillips, Flat Wafer Head, Fine Thread, Drill Point, GrabberGard® Gray 15, Screws (1-LB)
Item Number: XGCB8158SD
For attaching cement board to heavy gauge cold-formed steel, 33-97 mil (20-12ga).
ICC-ES Evaluated
ESR-5616 Report
Specifications
| Application | Cement Board to Metal |
|---|---|
| Bit Tip | #2 Phillips |
| Head Type | Flat Wafer Head |
| Thread Type | Fine |
| Coating | GrabberGard® Gray 1500 |
| Point Type | Drill Point |
| Gauge | 8 |
| Metric Gauge | 4.2 |
| Length | 1 5/8 in. |
| Head Diameter | 0.404 in. |
| Package Type | 1-LB |
| Amount | 193 |
| Threads Per Inch | 18 |
Also available in
- Bulk Box GCB8158SD
- 5-LB VBGCB8158SD
- 1-LB XGCB8158SD
Available in other lengths
- 1 1/4 in. XGCB8125SD
- 1 5/8 in. XGCB8158SD
- 2 3/8 in. XGCB8238SD
Benefits
- Pro-Fit™ # 2 Phillips recess
- .40-in flat wafer head with nibs
- GrabberGard® 1500 hour exterior-grade coating
- Extra sharp drill point
Recommended Application
Attach high density sheathing or cement board to steel 33 mil or thicker.
Installation Guidelines
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 2,500 RPM.
- The screw head is fully seated when the screw head is flush with the surface of the material.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener.
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.