Grabber®
8 x 3/4-in #2 Phillips, Dome Head, Fine Thread, Tek 3 Drill Point, Clear Zinc Screws (1-LB)
Item Number: X834FZ3
Specifications
| Application | Metal to Metal |
|---|---|
| Bit Tip | #2 Phillips |
| Head Type | Dome Head |
| Thread Type | Fine |
| Coating | Clear Zinc |
| Point Type | Tek 3 Drill Point |
| Gauge | 8 |
| Metric Gauge | 4.2 |
| Length | 3/4 in. |
| Head Diameter | 0.164 in. |
| Package Type | 1-LB |
| Amount | 203 |
| Threads Per Inch | 18 |
Also available in
- Bulk Box 834FZ3
- 1-LB X834FZ3
Available in other lengths
- 1/2 in. X234FZ
- 3/4 in. X834FZ3
Benefits
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The dome head design provides better holding power in metal to heavy-gauge metal applications.
- Grabber heavy-gauge metal screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
Recommended Application
- Heavy-gauge metal to metal applications.
Installation Guidelines
- Suggested screwgun specification for optimal performance – Size #8, up to 2,500 RPM.
- The head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener or stripout within the substrate.
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.