Grabber®
8 x 3-1/2-in Phillips, Bugle Head, Coarse Thread, GrabberGard® Red Screws (5-LB)
Item Number: VB1200RRG
Attaches sheathing, insulation board, wood, etc. to wood. Standard bugle head. Superior GrabberGard® exterior grade coating provides additional corrosion protection.
Specifications
| Application | Wood to Wood |
|---|---|
| Bit Tip | #2 Phillips |
| Head Type | Bugle Head |
| Thread Type | Coarse |
| Coating | GrabberGard® Red |
| Point Type | 23° Grabber® Point |
| Gauge | 8 |
| Length | 3 1/2 in. |
| Head Diameter | 0.325 in. |
| Package Type | 5-LB |
| Amount | 287 |
| Threads Per Inch | 8 |
| Metric Size | 4.2 |
Also available in
- Bulk Box 1200RRG
- 5-LB VB1200RRG
- 1-LB X1200RRG
Available in other lengths
- 2 1/2 in. VB900RRG
- 3 in. VB1100RRG
- 3 1/2 in. VB1200RRG
Benefits
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- Head dies are changed more frequently, screws are more evenly heat treated resulting in better formed and stronger heads that resist popping off as screws seat.
- GrabberGard® limited lifetime exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Grabber’s extra sharp 23˚ Grabber® point design starts immediately and is much less likely to flop over.
Recommended Application
Exterior General Wood Screws. Superior corrosion resistance.
Installation Guidelines
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – size #6 - #10, up to 4,000 RPM.
- For gypsum board, the Bugle head is below the surface of the wallboard in accordance with Section 7.2.2 of ASTM C1002.
- Overdriving may result in failure of the fastener or strip out of the gypsum board.
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1002 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.