Grabber®
LAG-MASTER™ 14 x 3-in Hex Head, Coarse Thread, Type 17 Point, Galvanized Screws (Mini Pack)
Item Number: GLM300RP
Lag-Master™ is a multi-purpose wood fastener for general wood construction, laminated beams, under-deck connections, and dimensional lumber.
ICC-ES Evaluated
ESR-3531 Report
Specifications
| Application | Wood to Wood |
|---|---|
| Bit Tip | 3/8 in. Hex |
| Head Type | Hex Head |
| Thread Type | Coarse |
| Coating | Mechanically Galvanized |
| Point Type | Type 17 Point |
| Gauge | 14 |
| Metric Gauge | 6.1 |
| Length | 3 in. |
| Head Diameter | 0.5 in. |
| Package Type | Mini Pack |
| Amount | 10 |
| Product Family | Lag-Master™ |
| Threads Per Inch | 10 |
Available in other lengths
Benefits
- 3/8-in hex washer head provides for ultimate torque and higher load-bearing capability in structural wood to wood applications.
- DrawTite™ shank pulls wood members rather than forcing them apart as the fastener drives in and seats.
- Lag-Master™ timber fasteners are mechanically galvanized against corrosion to ASTM B695 Class 55. Grabber’s galvanized coating is ACQ compliant.
- The type 17 point starts and drives into most common wood species without needing to pre-drill..
Recommended Application
Wood to wood applications
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – Size #14, up to2,500 RPM.
- Use of an impact driver is acceptable.
- The head is fully seated when the bearing surface of the head is flush with the work surface.
- Overdriving my result in fastener failure or strip out of the work surface.
Special Features
Mechanical Galvanized
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM B695 requirements and are ICC ESR-3531 approved. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.