Grabber®
PLYLITE™ 7 x 1-1/2-in #2 Phillips, Flat Head, Fine Thread, Unique Tapping Point, Yellow Zinc Screws (5-LB)
Item Number: VBGPLY150
Attaches and countersinks plywood to light gauge metal.
Specifications
| Application | Plywood to Metal |
|---|---|
| Bit Tip | #2 Phillips |
| Head Type | Flat Head |
| Thread Type | Fine |
| Coating | Yellow Zinc |
| Point Type | Unique Tapping Point |
| Gauge | 7 |
| Metric Gauge | 3.8 |
| Length | 1 1/2 in. |
| Head Diameter | 0.291 in. |
| Package Type | 5-LB |
| Amount | 1155 |
| Threads Per Inch | 16 |
Also available in
- Bulk Box GPLY150
- 5-LB VBGPLY150
- 1-LB XGPLY150
Available in other lengths
- 1 1/2 in. VBGPLY150
- 2 3/4 in. VBGPLY275
Benefits
- Grabber’s Pro-Fit™ #2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The flat head design provides better holding power in sheathing to light-gauge metal applications.
- Plylite's shank design lets it slide through and engage the steel stud preventing sheathing ride-up.
- The Unique Tapping Point penetrates through sheathing and through the metal substrate with ease.
Recommended Application
Attach sheathing to light-gauge metal up to 33 mil.
Installation Guidelines
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #7 - #8, up to 4,000 RPM.
- For wood, the screw is fully seated when the top of the head is flush with the work surface. The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
Special Features
Unique Tapping Point & smooth shank.
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.