Grabber®
TIE-MASTER™ 14 x 5-in Star T40 Drive, Flat Head, Coarse Thread, Type 17 Point, Galvanized Screws (Bucket)
Item Number: GTIE5B
Tie-Master™ multi-purpose wood fastener is for general wood construction such as laminated beams, under-deck connections, trusses and dimensional lumber, decks, docks, and boardwalks.
ICC-ES Evaluated
ESR-3531 Report
Specifications
| Application | Wood to Wood |
|---|---|
| Bit Tip | T40 Star |
| Head Type | Flat Head |
| Thread Type | Coarse |
| Coating | Mechanical Galvanized |
| Point Type | Type 17 Point |
| Gauge | 14 |
| Metric Gauge | 6.1 |
| Length | 5 in. |
| Head Diameter | 0.500 in. |
| Package Type | Bucket |
| Amount | 150 |
| Product Family | Tie-Master™ |
Available in other lengths
- 4 in. GTIE4B
- 4 1/2 in. GTIE412B
- 5 in. GTIE5B
- 6 in. GTIE6B
- 8 in. GTIE8B
Benefits
- Star 40 recess provides for superior torque capability and reliable performance in structural wood to wood applications.
- DrawTite™ shank pulls wood members rather than forcing them apart as the fastener drives in and seats.
- Tie-Master™ timber fasteners are mechanically galvanized against corrosion to ASTM B695 Class 55. Grabber’s galvanized coating is ACQ compliant.
- The type 17 point starts and drives into most common wood species without needing to pre-drill..
Recommended Application
Wood to wood applications
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – Size #14, up to2,500 RPM.
- Use of an impact driver is acceptable.
- The head is fully seated when the bearing surface of the head is flush with the work surface.
- Overdriving my result in fastener failure or strip out of the work surface.
Special Features
Mechanical Galvanized
Trademark
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM B695 requirements and are ICC ESR-3531 approved. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.