Scorpion®
10-16 x 1-5/8-in Phillips, Flat Head w/ nibs, Fine Thread, Winged Drill Point NanoGard™ Screws (5-LB)
Item Number: T3PF10158S
Scorpion Type T3PF flat head Tek 3 winged drill point screws are designed for attaching plywood and sheathing to heavy gauge metal. NanoGard™ exterior grade coating improves corrosion resistance. Performance range is 3/8″ to 3/4” lumber to 18-12 gauge (43-97 mil) steel.
Specifications
| Application | Sheathing to Metal |
|---|---|
| Bit Tip | Phillips |
| Head Type | Flat Head |
| Thread Type | Fine |
| Coating | NanoGard™ |
| Point Type | Winged Drill Point |
| Gauge | 10 |
| Metric Gauge | 4.8 |
| Length | 1 5/8 in. |
| Head Diameter | 0.363 in. |
| Package Type | 5-LB |
| Threads Per Inch | 16 |
Benefits
- The #2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The flat head design provides better holding power in sheathing to heavy-gauge metal applications.
- NanoGard™ exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing. Special wings clear away sheathing material as the screw drives eliminating jacking.
Recommended Application
For attaching plywood and sheathing to heavy gauge metal.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Size #10, up to 2,500 RPM.
- The flat head is fully seated when the head is flush with the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving my result in fastener failure or strip out of the work surface.
Special Features
Winged drill point - underhead nibs
Trademark
©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.