Scorpion®

10 x 1-1/4-in Phillips, Wafer Head, Fine Thread, #3 Winged Drill Point, NanoGard™ Screws (Bulk)

Name: 10 x 1-1/4-in Phillips, Wafer Head, Fine Thread, #3 Winged Drill Point, NanoGard™ Screws (Bulk)
Brand: Scorpion®
SKU: T3PW10114XT

Item Number: T3PW10114XT

Scorpion Type T3PW Wafer Head winged drill point screws are designed for attaching plywood and sheathing to heavy gauge metal. Performance range is 1/4″ to 3/4″ lumber to 43-118 mil (18-10 gauge) steel.

Specifications

Application	Cement Board to Metal
Bit Tip	Phillips
Head Type	Wafer Head
Thread Type	Fine
Coating	NanoGard™
Point Type	Winged Drill Point
Gauge	10
Metric Gauge	4.8
Length	1 1/4 in.
Head Diameter	0.474 in.
Package Type	Bulk
Amount	3500
Threads Per Inch	24

Available in other lengths

Benefits

The Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
The Wafer Head design provides for a larger load bearing surface and better holding power in cement board to heavy gauge metal applications.
NanoGard™ exterior-grade coating provides additional protection against corrosion in most exterior applications.
Self-tapping drill point is designed for quick penetration into heavy-gauge metal. Special wings clear away sheathing material as the fastener drives in.

Recommended Application

For attaching cement board to heavy gauge metal 43 mil (18ga) or thicker.

Installation Guidelines

Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with an impact driver. Suggested screw gun specification for optimal performance - Size #8 - #10 up to 2,500 RPM.
The Wafer Head is fully seated when the top of the head is flush with the work surface.
The fastener must penetrate beyond the metal a minimum of three full threads.
Overdriving my result in fastener failure or strip out of the work surface.

Special Features

Wings