Scorpion®
10 x 1-1/4-in Square Drive, Wafer Head, Hi-Lo Thread Screws (Bulk)
Item Number: BBSP114
Scorpion Type BBSP wafer head hi-low thread screws are designed for attaching cement board and high density backer board to wood or light gauge (25-20 ga) metal. Countersinking nibs and wafer head seat flush.
Specifications
| Application | Cement Board to Metal or Wood |
|---|---|
| Bit Tip | #2 Square |
| Head Type | Wafer Head |
| Thread Type | High-Low Alternating |
| Coating | NanoGard™ |
| Point Type | Spoon Point |
| Gauge | 10 |
| Metric Gauge | 4.8 |
| Length | 1 1/4 in. |
| Head Diameter | 0.354 in. |
| Package Type | Bulk |
| Amount | 3500 |
| Threads Per Inch | 14 Hi-Lo |
Also available in
- Bulk BBSP114
- Pack BBSP114CP
Available in other lengths
- 1 1/4 in. BBSP114
- 1 5/8 in. BBSP158
Benefits
Scorpion screws comply with ASTM C1513 for self-drilling fasteners for cold-formed steel. Salt spray tested according to ASTM B117 for 1000 hours; 15 cycles Kesternich per DIN 50018; no red rust. Approved for use in non-coastal areas with all pressure treated lumbers including ACQ.
Recommended Application
Cement board attachment to light gauge steel or wood.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Size #8 - #10 up to 4,000 RPM.
- The wafer head is fully seated when the top of the head is flush with the substrate surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
Special Features
Self-countersinking nibs
Trademark
©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.