Scorpion®
10 x 1-1/4-in Square Drive, Wafer Head, Hi-Lo Thread Screws (Mini Pack)
Item Number: BBSP114C
Scorpion Type BBSP wafer head hi-low thread screws are designed for attaching cement board and high density backer board to wood or light gauge (25-20 ga) metal. Countersinking nibs and wafer head seat flush.
Specifications
| Application | Cement Board to Metal or Wood |
|---|---|
| Bit Tip | #2 Square |
| Head Type | Wafer Head |
| Thread Type | High-Low Alternating |
| Coating | NanoGard™ |
| Point Type | Spoon Point |
| Gauge | 10 |
| Metric Gauge | 4.8 |
| Length | 1 1/4 in. |
| Head Diameter | 0.354 in. |
| Package Type | Pack |
| Amount | 100 |
| Threads Per Inch | 14 Hi-Lo |
Available in other lengths
- 1 1/4 in. BBSP114C
- 1 5/8 in. BBSP158CP
Benefits
- The No. 1 square recess is a precision recess designed for secure bit engagement.
- The wafer head with nibs provides better holding power in cement board to wood or light gauge metal applications. Special nibs self-countersink as the screw seats.
- NanoGard™ exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Alternating or high-low threads and the spoon point help these cement board screws start faster and drive easier into wood and light gauge steel.
Recommended Application
Cement board attachment to light gauge steel or wood.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Size #8 - #10 up to 4,000 RPM.
- The wafer head is fully seated when the top of the head is flush with the substrate surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
Special Features
Self-countersinking nibs
Trademark
©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.