Scorpion®
10 x 3-1/2-in Phillips, Bugle Head, Fine Thread, #3 Drill Point, Clear Zinc Screws (Bulk)
Item Number: DPZ312
Scorpion Type D/P Drill Point fasteners are designed for attaching gypsum board and sheathing to heavy gauge metal studs 33-97 mil (20-12 gauge).
Specifications
| Application | Drywall to Metal |
|---|---|
| Bit Tip | Phillips |
| Head Type | Bugle Head |
| Thread Type | Fine |
| Coating | Clear Zinc |
| Point Type | #3 Drill Point |
| Gauge | 10 |
| Metric Gauge | 4.8 |
| Length | 3 1/2 in. |
| Head Diameter | 0.343 in. |
| Package Type | Bulk |
| Amount | 1000 |
| Threads Per Inch | 16 |
Also available in
- Bulk DPZ312
- 5-LB DPZ312FP
- 1-LB DPZ312PP
- Pack DPZ312CP
Available in other lengths
- 3 1/2 in. DPZ312
- 4 in. DPZ400
- 5 in. DPZ500
- 6 in. DPZ600
Benefits
Scorpion self-drilling drywall screws comply with ASTM C954 for attaching gypsum panel products to cold-formed steel.
Recommended Application
Drywall or sheathing attachment to steel 33 mil or thicker.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #6 - #10 up to 2,500 RPM.
- The Bugle Head is fully seated when the top of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
Trademark
©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.