Scorpion®

10 x 5/8-in Phillips, Low Profile Pan Head, Notched Fine Thread, #3.5 Super-Tek Drill Point, Clear Zinc Screws (Mini Pack)

Name: 10 x 5/8-in Phillips, Low Profile Pan Head, Notched Fine Thread, #3.5 Super-Tek Drill Point, Clear Zinc Screws (Mini Pack)
Brand: Scorpion®
SKU: DPZ058LCP

Item Number: DPZ058LCP

Scorpion Type D/P drill point screws are designed for heavy gauge metal to metal framing applications.

Specifications

Application	Metal to Metal
Bit Tip	Phillips
Head Type	Pan Head
Thread Type	Fine
Coating	Clear Zinc
Point Type	#3.5 Super Tek Drill Point
Gauge	10
Metric Gauge	4.8
Length	5/8 in.
Head Diameter	0.3 in.
Package Type	Mini Pack
Amount	1000
Threads Per Inch	24

Also available in

Bulk DPZ058L
5-LB DPZ058LFP
Mini Pack DPZ058LCP

Available in other lengths

5/8 in. DPZ058CP
5/8 in. DPZ058LCP

Benefits

The Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
The Low Profile Pan Head design provides a larger load bearing surface for better holding power.
The drill point screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
Self-tapping drill point is designed for quick penetration into heavy-gauge metal.

Recommended Application

For heavy gauge steel-to-steel attachment 43 mil (18ga) or thicker.

Installation Guidelines

Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #8 - #10 up to 2,500 RPM.
The Low Profile Pan Head is fully seated when the bearing surface of the head is flush with the work surface.
The fastener must penetrate beyond the metal a minimum of three full threads.
Overdriving my result in fastener failure or strip out of the work surface.

Special Features

Low Profile Pan Head - Sprial notches on thread