Scorpion®
10 x 5/8-in Phillips, Pan Head, Fine Thread, #3.5 Super-Tek Drill Point, Clear Zinc Screws (5-LB)
Item Number: DPZ058FP
Scorpion Type D/P drill point screws are designed for heavy gauge metal to metal framing applications.
Specifications
| Application | Metal to Metal |
|---|---|
| Bit Tip | Phillips |
| Head Type | Pan Head |
| Thread Type | Fine |
| Coating | Clear Zinc |
| Point Type | #3.5 Super Tek Drill Point |
| Gauge | 10 |
| Metric Gauge | 4.8 |
| Length | 5/8 in. |
| Head Diameter | 0.3 in. |
| Package Type | 5-LB |
| Amount | 975 |
| Threads Per Inch | 16 |
Also available in
- Bulk DPZ058
- 5-LB DPZ058FP
- 1-LB DPZ058PP
- Mini Pack DPZ058CP
Benefits
- The Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The Pan Head design provides a larger load bearing surface for better holding power.
- The drill point screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
- Self-tapping drill point is designed for quick penetration into heavy-gauge metal.
Recommended Application
For heavy gauge steel-to-steel attachment 43 mil (18ga) or thicker.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #8 - #10 up to 2,500 RPM.
- The Pan Head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
Trademark
©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.