Scorpion®

12 x 2-in Hex Head, Fine Thread, Slotted Shank, #4 Drill Point, NanoGard™ Screws (Bulk)

Name: 12 x 2-in Hex Head, Fine Thread, Slotted Shank, #4 Drill Point, NanoGard™ Screws (Bulk)
Brand: Scorpion®
SKU: T4HW12200XT

Item Number: T4HW12200XT

Scorpion Type T4HW Hex washer head drill point screws are designed for heavy-gauge metal to metal framing applications. NanoGard™ exterior grade coating improves corrosion resistance. Performance range up to 0.250.

Specifications

Application	Metal to Metal
Bit Tip	Hex Head
Head Type	Hex Head
Thread Type	Fine
Coating	NanoGard™
Point Type	#4 Drill Point
Gauge	12
Metric Gauge	5.5
Length	2 in.
Head Diameter	0.415 in.
Package Type	Bulk
Amount	2000
Threads Per Inch	24

Available in other lengths

Benefits

Hex washer head design provides maximum torque and holding power in metal to metal framing applications.
The hex washer head design provides a larger load bearing surface for better holding power.
NanoGard™ exterior-grade coating provides additional protection against corrosion in most exterior applications.
Self-tapping drill point is designed for quick penetration into heavy-gauge metal.

Recommended Application

For heavy gauge steel-to-steel attachment 43 mil (18ga) or thicker.

Installation Guidelines

Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #10 up to 2,500 RPM, Size #12 up to 1,800 RPM; however, 2,500 RPM may be used provided care is exercised to minimize influence of high heat buildup due to surface speed (see ASTM C1513, Table 5, note C).
The hex head is fully seated when the bearing surface of the head is flush with the work surface.
The fastener must penetrate beyond the metal a minimum of three full threads.
Overdriving my result in fastener failure or strip out of the work surface.

Special Features

Slotted Shank